How do I find a leak in my product?
Using a spray bottle and soapy solution, thoroughly spray sections of your inflated product watching for bubbles. Make sure to check around all valves and seams.
How do I repair a pin hole?
Pin holes can be repaired very quickly using either the patch kit you received with your product or by using Air Seal (U051/AS1). It only takes a few minutes for Air Seal to dry completely.
How do I repair a seam separation?
Seams can be repaired easily using our Seam Seal. This repair technique must be dried overnight. Larger seam separations should be repaired by Sevylor® or an authorized repair station. Details can be obtained from Customer Service.
What type of cleaner can I use on my boat?
All products can be cleaned with any mild household cleaner.
How should I store my product when not in use?
All products can be stored easily. Make sure product is clean and dry before packing away to prevent mildew. One suggestion is to roll up deflated product and store in canvas duffle bag.
How do you inflate a Boston Valve?
Make sure the valve is screwed into the valve base securely. Unscrew the square top and attach the hose of any inflator designed for use with PVC products.
Do we sell adaptors so Sevylor® products can be inflated at a gas station?
We do not make any sort of adaptors for this purpose. Inflating your product using any type of compressor will completely void your warranty. This is detailed in all instructions which come with our products.
Why does my kayak keep going in circles?
Since inflatable kayaks are very light they are subject to wind and water currents. This can be controlled somewhat by paddling close to the kayak and sitting forward. Another way to help is by purchasing a Skeg we designed to attach under the rear spray cover. This will help the kayak run straighter and eliminate some of the zig zagging.
Do I need to register my boat?
Regulations vary from district to district. Please check with your local Department of Motor Vehicles for the requirements in your area.
How do I obtain a Manufacturer’s Certificate of Origin (MCO)?
With every boat sold there is a blank MCO included in the instruction manual that can be filled out with the pertinent information and notarized. However, if it is missing please contact Customer Service. One can be completed and sent to you
Does Sevylor offer products for the waterpark industry?
Yes, Sevylor has many products geared specifically for waterparks and the waterpark industry. Click here to downlod our 2008 catalog. For ordering information or other questions on our waterpark assortment, please contact one of the following:
United States or International
Jim Goldhardt
480-947-9978
jimg@stearnsnet.com
Canada
JD Blades
320-202-3398
jdb@stearnsnet.com
|
